Tantillus portable 3D printer

Tantillus brings form and function together to achieve a truly enjoyable 3D printing experience. Capable of self replication and 100% open source.
Technology
$10,450USD
raised of $30,000 goal
35%
0 time left
This campaign started on May 15 and closed on June 14, 2012 (11:59pm PT).
Flexible Funding
Campaign Closed
This campaign ended on June 14, 2012
Select a Perk
  • $15USD
    Hobbed bolt

    For those of you who wish to print the fully printed version of Tantillus. You will receive one Tantillus specific hobbed bolt with nuts, washers and free shipping.

    2 out of 50 claimed

  • $30USD
    Hobbed bolt and Extruder mount

    For those of you who wish to print the fully printed version of Tantillus. You will receive one Tantillus specific hobbed bolt and one Laser cut acrylic groove mount plate with free shipping.

    5 out of 50 claimed

  • $90USD
    Laser cut acrylic parts

    For those of you who already have a 3D printer. You will receive a full set of Laser cut acrylic parts to build your very own Tantillus. Includes Front, Left, Rear and Right panels. Plus the Upper and Lower print bed, Extruder spacer and Hotend groove mount. (shipping to be calculated later at actual cost)

    1 out of 10 claimed

  • $110USD
    Hardware kit

    For those of you who already have a 3D printer. You will receive all the hardware required to build a Tantillus. Includes all bolts, Nuts, Washers, Rods, Bearings, Zip ties, Springs, Tubing, Cables. (shipping to be calculated later at actual cost)

    9 out of 10 claimed

  • $190USD
    Acrylic parts + Hardware

    For those of you who already have a 3D printer. You will receive all the Acrylic parts and Hardware required to build Tanitillus. Includes everything from previous two perks. (shipping to be calculated later at actual cost)

    6 out of 10 claimed

  • $290USD
    Acrylic Panels + Printed parts

    For those of you without a 3D printer. You will receive all the acrylic parts and 3D printed parts required to build Tantillus. Including everything from the Acrylic parts perk plus all the printed parts required to build Tantillus as shown in the videos and pictures. Includes what others would call extras, like the fan mounts. (shipping to be calculated later at actual cost)

    0 out of 10 claimed

  • $390USD
    Acrylic + Hardware + Printed

    For those of you without a 3D printer. You will receive all the acrylic parts, hardware and printed parts required to build Tantillus. See previous perks for details on what is included. (shipping to be calculated later at actual cost)

    0 out of 10 claimed

  • $850USD
    Deluxe complete kit

    For those of you without a 3D printer. You will receive everything required to build Tantillus and get up and running. Includes everthing from the previous perk plus, Ramps board, Arduino mega 2560, 4 stepper drivers, 4 Nema 17 motors, Power supply, 2 J-head hotends (0.5mm and 0.35mm), LCD screen, SD reader, Rotary encoder, Connectors, Ribbon cable, Zip wire, Kapton tape, Shrink tubing, Fans, Allen keys, Glass build surface, USB cable, plus more. (shipping to be calculated later at actual cost)

    7 out of 10 claimed

  • $1,500USD
    Assembled Tantillus

    You will receive a fully assembled and calibrated machine with the 0.5mm J-head installed and 0.35mm separate. (shipping to be calculated later at actual cost)

    0 out of 20 claimed

  • $2,000USD
    Special Edition

    You will receive a fully assembled and calibrated special edition Tantillus 3D printer in your choice of color (acrylic and printed parts). They will have the 0.5mm J-head installed and 0.35mm separate. All special edition units will be numbered and include personalized engraving on the front panel. (shipping to be calculated later at actual cost)

    1 out of 10 claimed

Do you think this campaign contains prohibited content? Let us know.