SeeMeCNC H-1

Super affordable home machining starting with our H-1 3D printer
Technology
$24,332USD
raised of $2,500 goal
973%
0 time left
This campaign started on Nov 12 and closed on December 09, 2011 (11:59pm PT).
Flexible Funding
Campaign Closed
This campaign ended on December 9, 2011
Select a Perk
  • $1USD
    Thank you for your support!

    For only a dollar, we'll put your name on our seemecnc.org supporter's page.

    2 claimed

  • $5USD
    Key Chain

    We'll mail you a SeeMeCNC key chain.

    0 claimed

  • $10USD
    Engraving

    We'll engrave 16 characters of your choice into the plastic injection mold that makes the TABLE. We're molding the TABLE platform out of clear plastic. All H-1's we produce will forever be embossed with your name or 16 characters. (We reserve the right to review and restrict any inappropriate lettering. Our project is "family friendly".)

    8 out of 75 claimed

  • $35USD
    Plastic Parts Only

    Only contribute for this perk if you're into DIY projects. You'll get all the plastic parts we make! This includes extruder parts and gears. We'll provide a list of hardware required to complete the kit. We'll also provide drawings to show assembly details.

    7 claimed

  • $65USD
    Extruder Controller Board

    This perk is only for our extruder electronic control board. Contribute here if you want an on/off stepper speed controller. This controller connects to the spindle on/off relay found on many popular breakout boards. Our controller incorporates thermistor temperature control and feedback of the heating head.

    5 claimed

  • $100USD
    Complete Parts and Hardware

    There are no electronics, however you'll get a complete set of parts, hardware, belts, and pulleys with instructions to build a complete machine. It'll be sitting sitting in front of you 'screaming' for motors and electronics of your choosing!! Get this perk if you want to buy another controller for the H-1, like an Arduino based controller.

    37 claimed

  • $350USD
    Parts Kit with Electronics

    For the DIY in you, this perk gets a complete set of parts, motors, and electronics. It's for someone who likes putting things together. The electronics are used with a Mach3 or EMC2 software setup. Our H-1 prototype testing is done with Mach3.

    45 claimed

  • $450USD
    H-1 Assembled Tested

    The H-1 assembled, calibrated, and tested for use with Mach3. Used with a PC that has a parallel port. Instructions for Mach3 setup will be available on our website. We'll have a link for Mach3 configuration used with our electronics. For packaging purposes, there will be minor assembly required.

    9 claimed

Do you think this campaign contains prohibited content? Let us know.