Balboa RepRap: 3D printing and Industrial Design

Help give teens a hands on experience with a 3D printer to learn about engineering and Industrial Design!
raised of $2,000 goal
0 time left
This campaign started on Nov 15 and closed on December 17, 2011 (11:59pm PT).
Flexible Funding
Campaign Closed
This campaign ended on December 17, 2011
Select a Perk

    Not a perk... Makerbot Build

    If we exceed our goal by the 7th of December, everyone who contributed will get a sneak peek at the build video of the makerbot! Thanks for donating!

    0 out of 0 claimed

  • $1USD
    Pat...Pat Pat Pat on the back!

    Thanks for your donation! You brought us a step closer to reaching our goal you should be proud of that and you should feel happy that you donated to a worthy cause! You will receive a personalized thank you email.

    0 claimed

  • $5USD
    Triple pat on the back

    Thanks for your Donation! We couldn't do it without you! You will receive the above plus a video of our first print.

    0 claimed

  • $10USD
    Thank You! Thank You!

    Thank You! Gracias! You will receive the above plus a Thank You video we will email to you at the end of the campaign!

    0 claimed

  • $25USD
    Thank You so much!

    I'm running out of ways to say Thank You! Your donation bought us about 1 lb of ABS printing plastic :) You will receive a special Balboa RepRap 3D Printed magnet! In addition to the above. *Note this perk may take some time to get our printer working just be patient. :) Thanks again!

    0 claimed

  • $50USD
    Thanks for the ABS

    Thank You! Dankie! Gracias! Arigato! You bought us a full 1kg roll of ABS plastic! 1kg of ABS gives us about 75 hours worth of printing. You will recieve the above and a limited edition specially designed keychain for this perk only! In addition you will be able to pick a color you want the ABS to be (Please see Makerbot website for 1.75 filament) Only 14 so that we can use other funds to buy the actual printer. *No glow in the dark, PLA, or water soluble

    1 out of 14 claimed

  • $50USD
    3.8% of a Makerbot!

    Thank You! You either paid for 3.8% of our 3D printer or some more supplies depending on when you donate! You will receive the above except for the $50 Thank You for the ABS!, You will receive a keychain designed by a member! In addition when our printer is up and running we will print something on your behalf and send you a picture.

    2 claimed

  • $100USD
    Fund the Revolution

    Revolutions have many expenses, this one does too. You will receive a custom made keychain with your name in addition to all of the previous perks. In addition, you will be a sponsor for one of our meetings. your name will go on the slide that will be used for years to come. In addition you will receive any notes taken by students and a letter saying what they have learned. Your name will be printed and put on a plaque.

    0 claimed

  • $500USD
    Thanks for the 25%

    You will receive all of the above in addition, you will be one of the first to receive the winning product design from the Final Challenge!

    0 claimed

Do you think this campaign contains prohibited content? Let us know.