Robot Dragonfly - Micro Aerial Vehicle

PASSWORDS RESET

Greetings from the TechJect Team!

We have today reset everyone’s passwords and you should have received an email from us listing your new passwords. (for security, we recommend changing your password after you login)

The login website is: https://secure.techject.com/indiegogo

Email is your email used for contribution to the project compaign.

NOTE: Please check your spam / junk folders to make sure our email didn’t end up there.

NOTE: There are users with multiple perks and we are in the process of making a custom page where they will be able to see all their perks. We will send out an update when the pages are complete.

We are working on putting more options and will keep you updated!

Cheers,

TechJect Team

CUSTOMIZATION LINKS

Happy weekend everyone!

The customization links have been placed online.

A few things to note: If you contributed for more than one perk, you will only be able to see ONE of your contributed perks; do not be alarmed! we are preparing a screen where all your perks will be listed for you to customize individually. We will notify that through another update in the next few days.

Please follow these steps to gain access to your perks

1. https://secure.techject.com/indiegogo

2. Use your email (used on Indiegogo during the campaign)

3. Password: indietechlogin!@#
(NOTE: For security, change your passwords as soon as you login by going to the admin tab)

When you are logged in:

a. The ‘PRODUCT’ screen lets you confirm your perk and allows you to choose colors, add-on options and more

(NOTE 1: If you see any discrepancy in your perk description or got entered with the “wrong” perk, please do not panic; simply, send us an email at Support@techject.com and let us know the correction, we will change that in the database; please allow a few days for the changes to reflect on your ‘Product’ page)

(NOTE 2: There are other options we will add to the screen, such as T-shirt sizes, coffee-mugs, posters etc. We will send out an update to that end later)

(NOTE 3: We are allowing upgrades from ALPHA to DELTA for now and are working on the logistics to allow the others upgrades and will send out an update later)

c. ADMIN page – lets you change your login email and/or password. We highly recommend that you change your password immediately after logging in the first time.

In case of any changes and/or corrections, email us at Support@TechJect.com. Given the number of emails we get everyday, please allow us a few days to make the required change for you and have it reflected on the website.

We will be continuing with the Robot Dragonfly 101 Series. Stay tuned!

Enjoy your weekend!

TechJect Team

SDK Update and Customization Update

Customization: We understand everyone wants to customize their colors, make upgrades and update shipping addresses. We’ve had a few glitches in the server and it wasn’t able to take up traffic without crashing; so we have shifted the server and for the past week have been putting in security features and transferring data and websites. One of those things we didn’t foresee happening, but did.
Good news is that the new server is working fine now and the custom links to personalize your systems are ready.

1. We will send out the links this week (haven’t done that yet, in case some were wondering, if they’ve missed something. You haven’t missed out on anything yet)

2. You can update your information and if any corrections on your perk, email us at support@techject.com

SDK Update
1. We’ve updated the SDK to support the much cheaper MCP2210 Chip instead of the expensive Aardvark controller.

2. We have updated the flight control and tuning parameters to the SDK

Both the versions of the SDK have been uploaded to the Software Development Kit (SDK) project on TechJect www.techject.com/start.php
(Note: We have taken down the forum for now till the servers are being shifted, if you don’t get logged in, please be patient we are moving the forum and should be up and operational soon; we will send an update as well)

Thanks again and we will be sending another update shortly!

TechJect Team

Robot Dragonfly 101 Series:

We have decided to start on the Pre-Production tour of the various parts, features, systems, sub-systems of the Robot Dragonflies with an update biweekly on the work that’s been done behind the scenes.

Although a lot of supporters requested to be taken off the mailing lists to avoid regular updates, we have to apologize we don’t have the ability to carry that out; but you should be able to opt out of updates by unsubscribing to Indiegogo emails.

Last time, we toured the plastic process for the wings. This week, we briefly touch on the plastic pre-production cycle for the mechanical parts of the Robot Dragonfly.

Chapter 2: Robot Dragonfly 101 – Plastic Pre-Production

Hope you enjoy!
Have a great weekend!

TechJect Team

Robot Dragonfly 101 Series:

We have decided to start on the Pre-Production tour of the various parts, features, systems, sub-systems of the Robot Dragonflies with an update each week on the work that’s been done behind the scenes.

Although a lot of supporters requested to be taken off the mailing lists to avoid regular updates, we have to apologize we don’t have the ability to carry that out; but you should be able to opt out of updates by unsubscribing to Indiegogo emails.

This week, we briefly touch on the pre-production models of the Dragonfly.

Chapter 1: Robot Dragonfly 101 – Wings

Hope you enjoy!
Have a great weekend!

TechJect Team